90° elbow made from PVC-U for changing the direction of a hydraulic pipe with a Ø50 mm diameter. It has two smooth-ended connections for gluing and a nominal pressure rating of PN16. It is suitable for professional pressurised water installations and PVC-U-compatible swimming pool hydraulic circuits. Colour: grey. Reference: 00106.
Units per box: 56
The Ø50 90° PVC elbow allows the direction of a pipe to be changed at a right angle within a plumbing system. Its two smooth ends are designed for a glue joint with compatible Ø50 mm pipework.
It is a fitting commonly used in hydraulic circuits for swimming pools, filtration systems, water pipes and technical installations made with pressure-rated PVC-U pipework.
The Ø50 90° PVC elbow is used when the installation requires a 90° change of direction. It can be used to adapt the pipework route to the space available in the plant room, to connect different sections of the circuit, or to direct the pipework towards pumps, filters, valves and other hydraulic components.
Before using a 90° elbow, the professional must assess the available space and the pressure drops in the circuit. Where the installation allows, two 45° elbows or a bend with a larger radius can provide a more gradual change of direction.
The PN16 rating indicates a nominal pressure of up to 16 bar at 20 °C under the conditions specified for the component and the system.
The maximum permissible pressure may decrease as the temperature rises and will also depend on the pipework, adhesive, valves, joints and other components of the circuit. The most restrictive value for the installation as a whole must always be used.
Featured articles to improve your pool or your customers' pool