The TRYCLOR MAX salt-based chlorinator It enables the automated production of chlorine in domestic swimming pools using salt electrolysis.
Available in 20, 30 and 40 g/h, features Wi-Fi connectivity, an integrated flow sensor and output control from 0 to 100 per cent.
Its cell with automatic polarity reversal helps to reduce scale build-up, whilst the controller allows you to check the salinity, temperature and operating status of the equipment.
A range of salt-based chlorination systems with different production capacities and integrated control functions.
The TRYCLOR MAX salt chlorinator with Wi-Fi is designed to simplify the treatment of water in domestic swimming pools using salt electrolysis.
The system uses the salt dissolved in the water to produce chlorine, helping to keep the swimming pool disinfected without the need for continuous manual dosing of conventional chlorine.
The range is available in three models of 20, 30 and 40 grams of chlorine per hour, which allows different production capacities to be selected according to the characteristics of each facility.
TRYCLOR MAX combines output control, Wi-Fi connectivity, parameter monitoring and low-flow protection in a single system.
Not all swimming pools have the same treatment requirements.
The volume of water is important, but temperature, exposure to the sun, filtration time, the number of bathers and the chemical conditions of the water also play a part.
TRYCLOR MAX therefore offers three production capacities:
| Model | Nominal output |
|---|---|
| TRYCLOR MAX TCM20 | 20 g/h |
| TRYCLOR MAX TCM30 | 30 g/h |
| TRYCLOR MAX TCM40 | 40 g/h |
Output can be adjusted from 0 to 100 per cent, allowing operation to be tailored to the conditions of the swimming pool.
The maximum recommended volume for each model must be determined by means of a validated technical design.
TRYCLOR MAX features Wi-Fi connectivity, allowing you to view device information and adjust its operating parameters via a mobile app.
The original documentation identifies the Smart Life app.
The documented features include:
Connectivity enables monitoring and adjustment operations to be carried out without physically accessing the controller, provided that the connection and the application are configured correctly.
One of the features of the TRYCLOR MAX is that a flow detector is included amongst the components supplied.
The detector monitors the flow of water through the system.
When the system detects a lack of flow, it stops chlorine production and displays the corresponding alarm message.
This function provides important protection for the operation of the equipment.
The detector is an external component that is fitted to the hydraulic circuit and connected to the controller.
The TRYCLOR MAX electrolysis cell features a polarity reversal system.
This function allows you to switch the polarity of the electrodes to help reduce limescale build-up.
The manual describes an investment cycle following eight cumulative hours of cell operation.
Polarity reversal helps to make maintenance easier, although it does not eliminate the need for regular inspections and cleaning where mineral deposits are present.
The unit produces chlorine in accordance with the production percentage set by the user.
This mode allows you to maintain a production schedule tailored to the pool’s usual requirements.
The AI mode includes adjustment functions linked to the pool’s set volume and operating time.
The functions described include estimating the amount of salt to be added and fine-tuning the processing time.
This mode does not involve automatic measurement of free chlorine or regulation via a Redox probe.
The BOOST function allows you to temporarily activate high-output production mode.
The mode can be switched off manually and, according to the manual, switches off automatically after a maximum of 24 hours.
It is designed for specific situations where there is a need to increase chlorine production.
The controller features an LCD screen and various operational indicators.
It allows you to view information relating to:
The indicators for high salinity, low salinity, no flow and cell inspection make it easier to identify situations that require attention.
TRYCLOR MAX is designed to be used at a recommended concentration of salt of 3 to 4 grams per litre of water, equivalent to 3,000–4,000 ppm.
The device allows you to check the salinity and provides alerts when the readings fall outside certain limits.
To ensure the system operates correctly, it is important to check the salt concentration and the chemical balance of the water regularly.
The amount of salt to be added depends on the actual volume of the pool and the existing salinity.
The system consists of an electronic control unit and a separate electrolysis cell.
The unit is fitted into the water return circuit, ensuring that the orientation and hydraulic conditions specified in the instructions are observed.
The flow detector must be installed with the arrow pointing in the direction of water flow.
The unit is fitted with connections for 1½″ and 2″ hydraulic systems, in accordance with the fittings described in the manual.
Installation and maintenance must be carried out by qualified personnel, in accordance with the manufacturer’s technical instructions and the relevant regulations.
Featured articles to improve your pool or your customers' pool